Technovit – Anamet https://anamet.com Tue, 29 Jul 2025 16:43:06 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://anamet.com/wp-content/uploads/2024/02/cropped-Logo-32x32.png Technovit – Anamet https://anamet.com 32 32 TECHNOVIT 3040 © https://anamet.com/product/technovit-3040-en/ Sun, 10 Mar 2024 16:30:47 +0000 https://anamet.com/?post_type=product&p=4777 Technovit® 3040 is an acrylic system for vertical or overhead field metallography applications. It is formulated primarily with methyl methacrylate resin, which allows for the creation of high-precision impressions with an accuracy of 1 micron. These precise impressions are beneficial for inspecting and measuring surfaces with meticulous detail, enabling thorough analysis and evaluation. Technovit® 3040 […]

The post TECHNOVIT 3040 © appeared first on Anamet.

]]> Technovit® 3040 is an acrylic system for vertical or overhead field metallography applications. It is formulated primarily with methyl methacrylate resin, which allows for the creation of high-precision impressions with an accuracy of 1 micron. These precise impressions are beneficial for inspecting and measuring surfaces with meticulous detail, enabling thorough analysis and evaluation.
Technovit® 3040 is also an excellent system for preserving and archiving surface conditions. It helps maintain the original surface state and is reliable for subsequent analyses and comparisons.
The flexible mixing of this acrylic system makes it ideal for use on large samples or hard-to-reach places.

** Additional fees are incurred for handling hazardous materials.

  • Acrylic
  • Exothermic temperature: 230 °F /110 °C
  • Polymerization time: 9 min
  • Cures rapidly
  • Clear yellow
  • Cast silicon mould
  • Some shrinkage
  • ­Impression accuracy one μm. ­
  • Dimensionally stable and easily removable
  • Variable mixing ratio possible

The post TECHNOVIT 3040 © appeared first on Anamet.

]]> TECHNOVIT 5000 – Acrylic https://anamet.com/product/technovit-5000-acrylic/ Sun, 10 Mar 2024 16:30:37 +0000 https://anamet.com/?post_type=product&p=4735 Technovit 5000 is a conductive polymer primarily composed of modified methyl methacrylate. The polymer matrix contains copper particles, which significantly improve its electrical conductivity. This conductive polymer is known for its ability to establish uniform electric contact throughout the material, making it valuable for applications requiring consistent and reliable electrical conductivity. It is recommended for […]

The post TECHNOVIT 5000 – Acrylic appeared first on Anamet.

]]> Technovit 5000 is a conductive polymer primarily composed of modified methyl methacrylate. The polymer matrix contains copper particles, which significantly improve its electrical conductivity. This conductive polymer is known for its ability to establish uniform electric contact throughout the material, making it valuable for applications requiring consistent and reliable electrical conductivity. It is recommended for SEM examination and electropolishing devices.

** Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 257 °F / 125°C
  • Polymerization time: 8-10 min
  • Cures rapidly.
  • Some shrinkage.
  • Homogeneous conductive.
  • SEM / Probe compatible.

The post TECHNOVIT 5000 – Acrylic appeared first on Anamet.

]]> TECHNOVIT 4004 © – Acrylic https://anamet.com/product/technovit-4004-acrylic/ Sun, 10 Mar 2024 16:30:36 +0000 https://anamet.com/?post_type=product&p=4719 Technovit 4004 is a versatile mounting system with rapid polymerization properties, a transparent yellow finish, and adjustable viscosity from 1:1 to 3:1 (powder to liquid) to accommodate various sample preparation requirements. One of the benefits of using this system is the ability to observe specimens through the mounting media during preparation.   It is recommended that […]

The post TECHNOVIT 4004 © – Acrylic appeared first on Anamet.

]]> Technovit 4004 is a versatile mounting system with rapid polymerization properties, a transparent yellow finish, and adjustable viscosity from 1:1 to 3:1 (powder to liquid) to accommodate various sample preparation requirements. One of the benefits of using this system is the ability to observe specimens through the mounting media during preparation.   It is recommended that users follow the recommended ratios and guidelines for optimal results.

** Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 211 °F / 99°C
  • Polymerization time: 9-12 min
  • Cures rapidly
  • Some shrinkage.
  • Good edge retention.
  • Variable mixing ratio.
  • Routine preparation.
  • Transparent.

The post TECHNOVIT 4004 © – Acrylic appeared first on Anamet.

]]> TECHNOVIT 4021 © – Acrylic https://anamet.com/product/technovit-4021-acrylic/ Sun, 10 Mar 2024 16:30:36 +0000 https://anamet.com/?post_type=product&p=4724 Technovit 4021© is an embedding resin containing no harmful substances like tetrahydrofurfuryl methacrylate or styrene. It is completely odourless and is recommended for embedding materials that require low gap formation and good abrasion resistance. The resin has a short curing time of 5 minutes without producing bubbles, allowing for quick sample preparation processing. Its low […]

The post TECHNOVIT 4021 © – Acrylic appeared first on Anamet.

]]> Technovit 4021© is an embedding resin containing no harmful substances like tetrahydrofurfuryl methacrylate or styrene. It is completely odourless and is recommended for embedding materials that require low gap formation and good abrasion resistance. The resin has a short curing time of 5 minutes without producing bubbles, allowing for quick sample preparation processing. Its low viscosity makes it effective in filling even fine specimen geometries without any bubble formation, ensuring complete embedding and preservation of samples for analysis or examination.

** Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 212 °F / 99°C
  • Reduced shrinkage.
  • Good edge retention.
  • Cures rapidly.
  • Less pollutant.
  • Low viscosity.
  • Odourless.
  • Fewer air bubbles.

The post TECHNOVIT 4021 © – Acrylic appeared first on Anamet.

]]> TECHNOVIT 4006 © – Acrylic https://anamet.com/product/technovit-4006-acrylic/ Sun, 10 Mar 2024 16:30:36 +0000 https://anamet.com/?post_type=product&p=4729 Technovit 4006 is a two-component resin system with powder and liquid components. This longer polymerization, lower temperature system is typically methyl methacrylate-based, which makes it ideal for preserving the integrity of temperature-sensitive samples. The integrated bonding agent in Technovit 4006 ensures a minimal or no gap between the specimen and the embedding medium, which helps […]

The post TECHNOVIT 4006 © – Acrylic appeared first on Anamet.

]]> Technovit 4006 is a two-component resin system with powder and liquid components. This longer polymerization, lower temperature system is typically methyl methacrylate-based, which makes it ideal for preserving the integrity of temperature-sensitive samples. The integrated bonding agent in Technovit 4006 ensures a minimal or no gap between the specimen and the embedding medium, which helps maintain the structural integrity and stability of the embedded specimen. Technovit 4006 is well-known for its crystal-clear transparency once cured, allowing easy visual inspection and analysis of embedded specimens.

**Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 211 °F / 99°C
  • Polymerization time: 9-12 min
  • Longer polymerization time
  • Good for sensitive material.
  • Excellent for visual inspection.
  • Reduced the polymerization heat by 10%.
  • Reduced shrinkage.
  • Routine preparation.

The post TECHNOVIT 4006 © – Acrylic appeared first on Anamet.

]]> TECHNOVIT EPOX© – Epoxy https://anamet.com/product/technovit-epox-epoxy/ Sun, 10 Mar 2024 16:30:31 +0000 https://anamet.com/?post_type=product&p=4705 Technovit EPOX© is a versatile epoxy resin system that consists of the Epox resin component and two hardener options: EPOX Hardener Fast, which has a shorter curing time, and EPOX Hardener Regular, which has an extended curing time. Choosing the appropriate hardener component allows you to easily adjust the curing time to suit your application’s […]

The post TECHNOVIT EPOX© – Epoxy appeared first on Anamet.

]]> Technovit EPOX© is a versatile epoxy resin system that consists of the Epox resin component and two hardener options: EPOX Hardener Fast, which has a shorter curing time, and EPOX Hardener Regular, which has an extended curing time. Choosing the appropriate hardener component allows you to easily adjust the curing time to suit your application’s requirements. When applied under vacuum or pressure vessel systems, a polymerization time of one hour ensures thorough infiltration of porous materials.
This system is suitable for various material types but is particularly recommended for porous materials that need embedding under vacuum or pressure. The epoxy resin can penetrate all crevices using vacuum impregnation or a pressure vessel, ensuring complete polymerization. To get the best results, use a mixing ratio of 2 parts resin to 1 part hardener.
If flexibility is needed during processing, the polymerization time can be adjusted by storing the mounted sample in a cold-water bath or refrigerator. This feature enables the tailoring of the polymerization time.

** Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 570C (Fast) / 350C (Regular)
  • Polymerization time: 10 hrs. (Fast) /18 hrs.(Regular)
  • Cures slowly or rapidly
  • Transparent
  • Excellent edge retention
  • Excellent abrasion resistance
  • Variable curing times

The post TECHNOVIT EPOX© – Epoxy appeared first on Anamet.

]]> TECHNOVIT 4000 © – Polyester https://anamet.com/product/technovit-4000-polyester/ Sun, 10 Mar 2024 16:30:31 +0000 https://anamet.com/?post_type=product&p=4709 Technovit 4000© is a system consisting of three components: powder, syrup 1, and syrup 2. The system is based on a modified polyester that cures quickly. One of the notable features of Technovit 4000© is its minimal polymerizing shrinkage, which reduces the possibility of distortion or damage to embedded samples during the curing process. This […]

The post TECHNOVIT 4000 © – Polyester appeared first on Anamet.

]]> Technovit 4000© is a system consisting of three components: powder, syrup 1, and syrup 2. The system is based on a modified polyester that cures quickly. One of the notable features of Technovit 4000© is its minimal polymerizing shrinkage, which reduces the possibility of distortion or damage to embedded samples during the curing process.

This system has been engineered with a modified polyester base, making it highly flexible and capable of conforming to the contours of embedded samples. This ensures precise embedding with minimal gaps. The fluidity of Technovit 4000© allows for the embedding of samples with porous surfaces, small gaps, blind holes, or undercuts, providing thorough coverage and penetration into intricate details.

Technovit 4000© has excellent flow characteristics that can enhance the polymerization process through vacuum impregnation/pressure vessel techniques. Vacuum impregnation eliminates air bubbles from the embedding material, while pressure aids in consolidating the material for complete curing.

**Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 251 °F / 122 °C
  • Polymerization time: 10 min
  • Cures rapidly.
  • Low shrinkage.
  • Excellent edge retention.
  • Excellent abrasion resistance.
  • Excellent flow behaviour.

The post TECHNOVIT 4000 © – Polyester appeared first on Anamet.

]]>