Acrylic – Anamet https://anamet.com Fri, 29 Nov 2024 18:31:30 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://anamet.com/wp-content/uploads/2024/02/cropped-Logo-32x32.png Acrylic – Anamet https://anamet.com 32 32 TECHNOVIT 5000 – Acrylic https://anamet.com/product/technovit-5000-acrylic/ Sun, 10 Mar 2024 16:30:37 +0000 https://anamet.com/?post_type=product&p=4735 Technovit 5000 is a conductive polymer primarily composed of modified methyl methacrylate. The polymer matrix contains copper particles, which significantly improve its electrical conductivity. This conductive polymer is known for its ability to establish uniform electric contact throughout the material, making it valuable for applications requiring consistent and reliable electrical conductivity. It is recommended for […]

The post TECHNOVIT 5000 – Acrylic appeared first on Anamet.

]]> Technovit 5000 is a conductive polymer primarily composed of modified methyl methacrylate. The polymer matrix contains copper particles, which significantly improve its electrical conductivity. This conductive polymer is known for its ability to establish uniform electric contact throughout the material, making it valuable for applications requiring consistent and reliable electrical conductivity. It is recommended for SEM examination and electropolishing devices.

** Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 257 °F / 125°C
  • Polymerization time: 8-10 min
  • Cures rapidly.
  • Some shrinkage.
  • Homogeneous conductive.
  • SEM / Probe compatible.

The post TECHNOVIT 5000 – Acrylic appeared first on Anamet.

]]> FORMULA 1 © – Acrylic https://anamet.com/product/formula-1-acrylic/ Sun, 10 Mar 2024 16:30:37 +0000 https://anamet.com/?post_type=product&p=4738 Formula 1 is a two-component system characterized by its transparent/white colour. It is composed of methyl methacrylate in resin and hardener. This system streamlines filling voids and holes by offering a no-mix method, eliminating the need to pre-mix components before use. It is recommended for most samples where the specimen must be inspected through the […]

The post FORMULA 1 © – Acrylic appeared first on Anamet.

]]> Formula 1 is a two-component system characterized by its transparent/white colour. It is composed of methyl methacrylate in resin and hardener. This system streamlines filling voids and holes by offering a no-mix method, eliminating the need to pre-mix components before use. It is recommended for most samples where the specimen must be inspected through the embedding media during sample preparation. Thanks to its rapid polymerization time, it is well-suited for routine work procedures requiring quick turnaround times.

**Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 160 °F / 71°C
  • Polymerization time: 9-12 min
  • Cures rapidly.
  • Some shrinkage.
  • Good edge retention.
  • White transparent.

The post FORMULA 1 © – Acrylic appeared first on Anamet.

]]> TECHNOVIT 4004 © – Acrylic https://anamet.com/product/technovit-4004-acrylic/ Sun, 10 Mar 2024 16:30:36 +0000 https://anamet.com/?post_type=product&p=4719 Technovit 4004 is a versatile mounting system with rapid polymerization properties, a transparent yellow finish, and adjustable viscosity from 1:1 to 3:1 (powder to liquid) to accommodate various sample preparation requirements. One of the benefits of using this system is the ability to observe specimens through the mounting media during preparation.   It is recommended that […]

The post TECHNOVIT 4004 © – Acrylic appeared first on Anamet.

]]> Technovit 4004 is a versatile mounting system with rapid polymerization properties, a transparent yellow finish, and adjustable viscosity from 1:1 to 3:1 (powder to liquid) to accommodate various sample preparation requirements. One of the benefits of using this system is the ability to observe specimens through the mounting media during preparation.   It is recommended that users follow the recommended ratios and guidelines for optimal results.

** Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 211 °F / 99°C
  • Polymerization time: 9-12 min
  • Cures rapidly
  • Some shrinkage.
  • Good edge retention.
  • Variable mixing ratio.
  • Routine preparation.
  • Transparent.

The post TECHNOVIT 4004 © – Acrylic appeared first on Anamet.

]]> TECHNOVIT 4021 © – Acrylic https://anamet.com/product/technovit-4021-acrylic/ Sun, 10 Mar 2024 16:30:36 +0000 https://anamet.com/?post_type=product&p=4724 Technovit 4021© is an embedding resin containing no harmful substances like tetrahydrofurfuryl methacrylate or styrene. It is completely odourless and is recommended for embedding materials that require low gap formation and good abrasion resistance. The resin has a short curing time of 5 minutes without producing bubbles, allowing for quick sample preparation processing. Its low […]

The post TECHNOVIT 4021 © – Acrylic appeared first on Anamet.

]]> Technovit 4021© is an embedding resin containing no harmful substances like tetrahydrofurfuryl methacrylate or styrene. It is completely odourless and is recommended for embedding materials that require low gap formation and good abrasion resistance. The resin has a short curing time of 5 minutes without producing bubbles, allowing for quick sample preparation processing. Its low viscosity makes it effective in filling even fine specimen geometries without any bubble formation, ensuring complete embedding and preservation of samples for analysis or examination.

** Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 212 °F / 99°C
  • Reduced shrinkage.
  • Good edge retention.
  • Cures rapidly.
  • Less pollutant.
  • Low viscosity.
  • Odourless.
  • Fewer air bubbles.

The post TECHNOVIT 4021 © – Acrylic appeared first on Anamet.

]]> TECHNOVIT 4006 © – Acrylic https://anamet.com/product/technovit-4006-acrylic/ Sun, 10 Mar 2024 16:30:36 +0000 https://anamet.com/?post_type=product&p=4729 Technovit 4006 is a two-component resin system with powder and liquid components. This longer polymerization, lower temperature system is typically methyl methacrylate-based, which makes it ideal for preserving the integrity of temperature-sensitive samples. The integrated bonding agent in Technovit 4006 ensures a minimal or no gap between the specimen and the embedding medium, which helps […]

The post TECHNOVIT 4006 © – Acrylic appeared first on Anamet.

]]> Technovit 4006 is a two-component resin system with powder and liquid components. This longer polymerization, lower temperature system is typically methyl methacrylate-based, which makes it ideal for preserving the integrity of temperature-sensitive samples. The integrated bonding agent in Technovit 4006 ensures a minimal or no gap between the specimen and the embedding medium, which helps maintain the structural integrity and stability of the embedded specimen. Technovit 4006 is well-known for its crystal-clear transparency once cured, allowing easy visual inspection and analysis of embedded specimens.

**Additional fees are incurred for handling hazardous materials.

  • Exothermic temperature: 211 °F / 99°C
  • Polymerization time: 9-12 min
  • Longer polymerization time
  • Good for sensitive material.
  • Excellent for visual inspection.
  • Reduced the polymerization heat by 10%.
  • Reduced shrinkage.
  • Routine preparation.

The post TECHNOVIT 4006 © – Acrylic appeared first on Anamet.

]]>