Compression mounting – Anamet https://anamet.com Sat, 31 May 2025 11:39:56 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://anamet.com/wp-content/uploads/2024/02/cropped-Logo-32x32.png Compression mounting – Anamet https://anamet.com 32 32 Diallyl phthalate powders – Fibre Glass https://anamet.com/product/diallyl-phthalate-powders-fibre-glass/ Mon, 25 Mar 2024 00:24:22 +0000 https://anamet.com/?post_type=product&p=6766 When short glass fibers are incorporated into diallyl phthalate (DAP) resin, it produces a composite material with exceptional mechanical properties, increased strength, and enhanced hardness. This composite resin is highly valuable for applications that involve analyzing medium-hard materials. Combining DAP’s chemical resistance with the reinforcing effect of glass fibres becomes an excellent choice for electropolishing […]

The post Diallyl phthalate powders – Fibre Glass appeared first on Anamet.

]]> When short glass fibers are incorporated into diallyl phthalate (DAP) resin, it produces a composite material with exceptional mechanical properties, increased strength, and enhanced hardness. This composite resin is highly valuable for applications that involve analyzing medium-hard materials. Combining DAP’s chemical resistance with the reinforcing effect of glass fibres becomes an excellent choice for electropolishing processes.

  • Thermosetting: 266- 374°F/130-190°C
  • Curing time: 8-10 min.
  • Excellent edge retention.
  • Low shrinkage.
  • Resistant to chemical attack.

The post Diallyl phthalate powders – Fibre Glass appeared first on Anamet.

]]> Phenolic preforms https://anamet.com/product/phenolic-preforms/ Mon, 11 Mar 2024 03:08:13 +0000 https://anamet.com/?post_type=product&p=5241 Metallographic samples are often embedded in phenolic preform resin to protect the fragile edges and ensure reproducing consistent sizing across multiple pieces. Phenolic preforms are the preferred choice for routine applications that require dimensional accuracy and shorter curing times.  The preforms are available in different colors, such as red, black, and green, providing flexibility to […]

The post Phenolic preforms appeared first on Anamet.

]]> Metallographic samples are often embedded in phenolic preform resin to protect the fragile edges and ensure reproducing consistent sizing across multiple pieces. Phenolic preforms are the preferred choice for routine applications that require dimensional accuracy and shorter curing times.  The preforms are available in different colors, such as red, black, and green, providing flexibility to accommodate different preferences and specific application requirements.

  • Thermosetting: 302-347 °F/150-175°C
  • Curing time: 8-10 min.
  • Routine preparation
  • Rapid.
  • High shrinkage.
  • Fair edge retention.
  • Not resistant to chemical attack.

 

The post Phenolic preforms appeared first on Anamet.

]]> Phenolic powders https://anamet.com/product/phenolic-powders/ Sun, 10 Mar 2024 16:30:59 +0000 https://anamet.com/?post_type=product&p=4847 Metallographic samples are frequently embedded in phenolic resin to retain their edges and prevent distortion during the mounting process. Phenolic powders are commonly used as fillers in combination with epoxy and diallyl phthalate powders for routine applications. It enhances mechanical strength, thermal stability, and chemical resistance. These phenolic powders are available in various colors, including […]

The post Phenolic powders appeared first on Anamet.

]]> Metallographic samples are frequently embedded in phenolic resin to retain their edges and prevent distortion during the mounting process. Phenolic powders are commonly used as fillers in combination with epoxy and diallyl phthalate powders for routine applications. It enhances mechanical strength, thermal stability, and chemical resistance. These phenolic powders are available in various colors, including brown, red, black, and green, providing flexibility to meet different preferences and specific application needs.

  • Thermosetting: 302-350°F/150-177 °C
  • Curing time: 8-10 min.
  • Routine preparation
  • Rapid.
  • High shrinkage.
  • Fair edge retention.
  • Not resistant to chemical attack.
  • Can be used as a filler.

The post Phenolic powders appeared first on Anamet.

]]> TECHNOTHERM 3000© https://anamet.com/product/enrobage-compression-a-chaud-poudres-thermodurcissable-technotherm-3000-conductrice/ Sun, 10 Mar 2024 16:30:18 +0000 https://anamet.com/?post_type=product&p=4623 Technotherm© 3000 is an electrically conductive resin that is infused with graphite. It is a part of the Technotherm product line and is particularly useful for SEM applications due to its high conductivity. This resin also has minimal shrinkage, which ensures precise imaging and analysis. Since the resin is inherently electrically conductive, it eliminates the […]

The post TECHNOTHERM 3000© appeared first on Anamet.

]]> Technotherm© 3000 is an electrically conductive resin that is infused with graphite. It is a part of the Technotherm product line and is particularly useful for SEM applications due to its high conductivity. This resin also has minimal shrinkage, which ensures precise imaging and analysis. Since the resin is inherently electrically conductive, it eliminates the need for additional treatments to dissipate accumulated charges on the specimen surface. This ensures that imaging and analysis are accurate. The resin’s conductivity makes it also suitable for electrolytic polishing processes.

  • Thermosetting: 320-356 °F/160-180°C
  • Curing time: 10-15 min.
  • Graphite filler.
  • Electrically conductive.
  • Low shrinkage.
  • SEM/electropolishing

The post TECHNOTHERM 3000© appeared first on Anamet.

]]> TECHNOTHERM 2000© https://anamet.com/product/enrobage-compression-a-chaud-poudres-thermodurcissable-technotherm-2000-fibres-de-verres/ Sun, 10 Mar 2024 16:30:18 +0000 https://anamet.com/?post_type=product&p=4626 Technotherm© 2000 is a hot mounting resin containing organic material reinforced with glass fibres. This versatile resin is easy to handle and is suitable for use with materials that are not sensitive to heat or pressure. The resin has excellent adhesion properties, which minimizes shrinkage during curing and ensures a strong bond between the sample […]

The post TECHNOTHERM 2000© appeared first on Anamet.

]]> Technotherm© 2000 is a hot mounting resin containing organic material reinforced with glass fibres. This versatile resin is easy to handle and is suitable for use with materials that are not sensitive to heat or pressure. The resin has excellent adhesion properties, which minimizes shrinkage during curing and ensures a strong bond between the sample and the resin. Its flow characteristics make it effective at permeating porous surfaces and ensuring thorough sample encapsulation. Technotherm 2000© is resistant to various chemicals commonly used in laboratory environments, making it durable and suitable for multiple applications where chemical exposure may occur.

  • Thermosetting: 320-356 °F/160-180°C
  • Curing time: 10-15 min.
  • Good edge retention.
  • Low shrinkage.
  • Resistant to chemical attack.
  • Resin is Inorganically filled.
  • Excellent filling behaviour.
  • No hazardous components.

The post TECHNOTHERM 2000© appeared first on Anamet.

]]> Thermoplastic powders https://anamet.com/product/enrobage-compression-a-chaud-poudres-thermoplastique/ Sun, 10 Mar 2024 16:30:14 +0000 https://anamet.com/?post_type=product&p=4619 Thermoplastic resins are powdered polymeric materials capable of softening and melting upon exposure to heat. In contrast to other materials, thermoplastic resins can be cooled and solidified without undergoing significant chemical changes in composition. Their ability to melt and flow under controlled conditions makes them particularly suitable for handling fragile materials.  A property of the […]

The post Thermoplastic powders appeared first on Anamet.

]]> Thermoplastic resins are powdered polymeric materials capable of softening and melting upon exposure to heat. In contrast to other materials, thermoplastic resins can be cooled and solidified without undergoing significant chemical changes in composition. Their ability to melt and flow under controlled conditions makes them particularly suitable for handling fragile materials.  A property of the thermoplastic resin is its transparency once cooled, enabling clear visibility through the specimen. This transparency makes it useful for applications where visual inspection or clarity is important.

  • Thermosetting: 284 °F/140°C
  • Curing time: 12-15 min.
  • Routine preparation.
  • Fair edge retention.
  • Not resistant to chemical attack.
  • Excellent for visual inspection.

The post Thermoplastic powders appeared first on Anamet.

]]> Diallyl phthalate powders – Mineral https://anamet.com/product/enrobage-compression-a-chaud-poudres-phthalate-diallyle-minerale/ Sun, 10 Mar 2024 16:30:14 +0000 https://anamet.com/?post_type=product&p=4612 Incorporating mineral fibers into the diallyl phthalate (DAP) resin composite material results in exceptional mechanical strength and chemical resistance. This unique combination renders it an excellent material for analyzing medium-hard substances. Adding mineral fibers enhances structural integrity and increases the resin’s hardness, making it ideal for evaluating the edges of medium-hard materials. Furthermore, its inherent […]

The post Diallyl phthalate powders – Mineral appeared first on Anamet.

]]> Incorporating mineral fibers into the diallyl phthalate (DAP) resin composite material results in exceptional mechanical strength and chemical resistance. This unique combination renders it an excellent material for analyzing medium-hard substances. Adding mineral fibers enhances structural integrity and increases the resin’s hardness, making it ideal for evaluating the edges of medium-hard materials. Furthermore, its inherent chemical resistance makes it suitable for chemical etching processes.

  • Thermosetting: 266-374°F/130-190°C
  • Curing time: 8-10 min.
  • Excellent edge retention.
  • Low shrinkage.
  • Resistant to chemical attack.

The post Diallyl phthalate powders – Mineral appeared first on Anamet.

]]> Epoxy Powders https://anamet.com/product/enrobage-compression-a-chaud-poudres-epoxydes/ Sun, 10 Mar 2024 16:30:14 +0000 https://anamet.com/?post_type=product&p=4615 This black epoxy resin, formulated with a balanced blend of coarse and fine particles infused with glass fibres and a mineral load, is ideal for precise edge examination of hard materials. Its enhanced flow properties ensure deep penetration into porous surfaces for thorough coverage and bonding. The particle mix also improves mechanical stability, reduces shrinkage, […]

The post Epoxy Powders appeared first on Anamet.

]]> This black epoxy resin, formulated with a balanced blend of coarse and fine particles infused with glass fibres and a mineral load, is ideal for precise edge examination of hard materials. Its enhanced flow properties ensure deep penetration into porous surfaces for thorough coverage and bonding. The particle mix also improves mechanical stability, reduces shrinkage, and delivers a smooth surface finish, combining ease of handling with reliable performance.

  • Thermosetting: 302-356 °F/150-180°C
  • Very hard.
  • Abrasive resistant
  • Excellent edge retention.
  • Best infiltration.
  • Low shrinkage.
  • Resistant to chemical attack

The post Epoxy Powders appeared first on Anamet.

]]>