Products
Diamond discs consist of a layer of carefully graded diamonds securely bonded to a 1/16 inch flat metal plate. Two bond types are available, metal bond and resin bond. Metal bond diamond discs consist of diamond particles electroplated to a 1/16 inch flat plate with a nickel bond. This process provides maximum bond strength, an aggressive cutting action and extends disc life. Resin bonded diamond discs use a resin matrix to bond the diamond particles to a flat aluminum backing. This results in a less aggressive cutting action but a finer finish. Both types of diamond discs are intended for ceramics, carbides and carbide alloys, nitrides, zirconia and other hardened metals. Regulating pressure and lubricant flow can control the texture of the finish obtained.
|
DIAMOND GRINDING DISCS
|
|
| DIAMETER: | 8 " (203 mm) • PSA |
| BOND: | Resin. |
| QUANTITY: | Each. |
|
PRODUCT NUMBER
|
MICRONS
|
PRODUCT NUMBER
|
MICRONS
|
|
471- 6
|
6
|
471- 45
|
45
|
|
471- 9
|
9
|
471- 60
|
60
|
|
471-15
|
15
|
471-160
|
160
|
|
471-30
|
30
|
471-300
|
300
|
back to top
|
DIAMOND GRINDING DISCS
|
|
| DIAMETER: | 8 " (203 mm) • PSA |
| BOND: | Metal. |
| QUANTITY: | Each. |
|
PRODUCT NUMBER
|
MICRONS
|
|
470- 15
|
15
|
|
470- 30
|
30
|
|
470- 45
|
45
|
|
470- 60
|
60
|
|
470-160
|
160
|
|
DIAMOND GRINDING DISCS
|
|
| DIAMETER: | 12 " (305 mm) • PSA |
| BOND: | Metal. |
| QUANTITY: | Each. |
|
PRODUCT NUMBER
|
MICRONS
|
|
476- 15
|
15
|
|
476- 30
|
30
|
|
476- 45
|
45
|
|
476- 60
|
60
|
|
476-160
|
160
|
 |
DIAMOND SPOT DISCS
|
back to top
Diamond spot discs consist of spot diamond electroplating through a color-coded nylon mesh substrate. This application procedure gives a longer life to the diamond spot disc, providing an aggressive material removal rate. The quality of the sample surface obtained will be dependent on the flatness of the substrate on which it is used. Since the fixed diamonds are much harder than the specimen and mounting material, the diamond spot discs will cut both at the same rate. This characteristic produces specimen edges with distinct sharpness. Diamond spot discs will prove most effective on hard non-ferrous metals, ceramic, carbides, zirconia alloys, cobalt super alloys, high-speed steels and titanium.
|
DIAMOND SPOT DISCS
|
|
| DIAMETER: | 8 " (203 mm) • PSA |
| BOND: | Resin. |
| UNIT: | Each. |
|
PRODUCT NUMBER
|
MICRONS
|
|
461-10
|
10
|
|
461-30
|
30
|
|
461-75
|
75
|
|
DIAMOND SPOT DISCS
|
|
| DIAMETER: | 12 " (305 mm) • PSA |
| BOND: | Resin. |
| UNIT: | Each. |
|
PRODUCT NUMBER
|
MICRONS
|
|
465-10
|
10
|
|
465-30
|
30
|
|
465-75
|
75
|
|
DIAMOND SPOT DISCS
|
|
| DIAMETER: | 8 " (203 mm) • PSA |
| BOND: | Metal. |
| UNIT: | Each. |
|
PRODUCT NUMBER
|
MICRONS
|
|
460- 10
|
10
|
|
460- 20
|
20
|
|
460- 40
|
40
|
|
460- 75
|
75
|
|
460-125
|
125
|
back to top
|
DIAMOND SPOT DISCS
|
|
| DIAMETER: | 12 " (305 mm) • PSA |
| BOND: | Metal. |
| UNIT: | Each. |
|
PRODUCT NUMBER
|
MICRONS
|
|
464- 10
|
10
|
|
464- 20
|
20
|
|
464- 40
|
40
|
|
464- 75
|
75
|
|
464-125
|
125
|
 |
Système de meulage CAMEO
|
The first step that is undertaken when samples are to be prepared is to planerize the sample surface. The pre-grinding is performed usually with Silicon Carbide abrasives. The CAMEO-PLATINUM disc provides a system that saves time and ensures the removal of the stock material is done evenly.
There are four different types of PLATINUM discs:
- Type 1 corresponds to grit size 60 to 120 Cami.
- Type 2 corresponds to grit size 240 to 280 Cami.
- Type 3 corresponds to grit size 320 Cami.
- Type 4 corresponds to grit size 600 Cami.
|
PRODUCT NUMBER
|
DESCRIPTION (type)
|
SIZE |
UNIT
|
|
495-200
|
Platinum Type 1
|
200 mm |
1
|
|
495-250
|
250 mm |
1
|
|
|
495-300
|
300 mm |
1
|
|
|
496-200
|
Platinum Type 2
|
200 mm |
1.
|
|
496-250
|
250 mm |
1
|
|
|
496-300
|
300 mm |
1
|
|
|
497-200
|
Platinum Type 3
|
200 mm |
1
|
|
497-250
|
250 mm |
1
|
|
|
497-300
|
300 mm |
1
|
|
|
498-200
|
Platinum Type 4
|
200 mm |
1
|
|
498-250
|
250 mm |
1
|
|
|
498-300
|
300 mm |
1
|